Сварочная машина Delta 630

Delta 630

КОМПЛЕКТАЦИЯ 

- шасси с набором инструментов; 
― нагревательный элемент TP DELTA 630 TE; 
-торцеватель; электрический гидроагрегат; 
― электрическая панель для подключения нагревательного элемента;

ТЕХНИЧЕСКИЕ ХАРАКТЕРИСТИКИ

Диаметр соединяемых труб 355 ― 630 мм

Мощность, потреб. нагрев. элементом TP  8100 Вт

Мощность, потребляемая торцевателем 1840 Вт

Мощность, потреб. гидроагрегатом 1472 Вт

Суммарная потребляемая мощность 11412 Вт

Температура окружающей среды 5 ... +40°C

Время разогрева до раб.температуры ~ 35 мин.

Общая площадь сечения цилиндров 43,982 см2

(^) Материалы ПЭ, ПП, ПВДФ

Welding apparatus with a centering automatic connection of pipes, welding of pipes with a diameter up to 630 mm, intended for the transmission of water, gas and other fluids under high pressure. Delta 630 machine was built in accordance with national and international standards (UNI 10565, ISO 12176 1).Consists of the following parts:- The structure of the carrying frame, four clamps and two hydraulic cylinders fitted with a sealed, quick-release connector; - Removable heating element separate heat needed to raise the temperature of the work; - Removable electrocortical adjustment points of the adjacent pipes and fittings, equipped with safety microswitch and circuit breaker protection from overload; - Add high-impact corrosion resistant plastic housing electro-hydraulic power unit with hand mixing and distribution of the videos with valves of maximum pressure and operating valves (useful also during the welding, the "double click"), water pipes with leak-proof connections fast connections, temporary Heating, welding), with a removable electrical panel equipped with a power socket to connect the heating element, electronic temperature controller to control the temperature, a differential circuit breaker a special touch, access to the electronic unit, the inspector data logging welding;Bed the pipe in front of the heating tool.With Delta 630 machine can be used welding equipment: elbows, T-shaped fittings, elbows, flanges. This is possible due to the third clamp, which is connected to movable, first and second clamps is moved along the guide rails together with the tube. Mounting attached to the fourth connection terminal. The lip is very tapered edges may be welded aid ofâ a special clamp (optional) clamp-key entries.